#include <zephyr/dt-bindings/gpio/gpio.h>

/ {
    chosen {
        zephyr,display = &st7789v3;
    };

    aliases {
        backlight = &backlight;
    };

    zephyr,user {
        vbat-en-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
        io-channels = <&adc 5>, <&adc 7>;
    };

    hid_dev_0: hid_dev_0 {
        compatible = "zephyr,hid-device";
        label = "HID_BOOT";
        protocol-code = "keyboard";
        in-report-size = <8>;
        in-polling-period-us = <1000>;
        out-report-size = <8>;
        out-polling-period-us = <1000>;
    };

    hid_dev_1: hid_dev_1 {
        compatible = "zephyr,hid-device";
        label = "HID_NKRO";
        protocol-code = "none";
        in-report-size = <31>;
        in-polling-period-us = <1000>;
        out-report-size = <31>;
        out-polling-period-us = <1000>;
    };

    raw_hid: hid_dev_2 {
        compatible = "zephyr,hid-device";
        label = "HID_RAW";
        protocol-code = "none";
        in-report-size = <64>;
        in-polling-period-us = <1000>;
        out-report-size = <64>;
        out-polling-period-us = <1000>;
    };
};

&gpio0 {
    status = "okay";
};

&gpio1 {
    status = "okay";
};

&gpiote {
    status = "okay";
};

&led_0 {
    status = "okay";
};

&led_1 {
    status = "okay";
};

/* 使能 SAADC，mode_switch_module 使用 channel 7 采样模式拨码电压。 */
&adc {
    status = "okay";
};

&i2c1 {
    status = "okay";

    ip5305: pmic@75 {
        status = "okay";
        keepalive-interval-ms = <10000>;
    };
};

&usbd {
    status = "okay";
};

qdec: &qdec {
	status = "okay";
};

&spi3 {
    status = "okay";
};

&mipi_dbi {
    status = "okay";
};

&st7789v3 {
    status = "okay";
};

&pwm_leds {
    status = "okay";
};

&pwm0 {
    status = "okay";
};