KeyBoard_QT/docs/firmware_proto_transport.md

Firmware Proto Transport

Goal

Add CDC and GATT private communication without rewriting the existing keyboard, time, theme, and LED business logic.

The firmware side should:

• keep standard HID behavior for normal keys
• receive host commands over CDC and GATT
• report private state and function key events over CDC and GATT
• reuse existing modules where possible

Completed Nodes

Node 1: internal function events

Files:

• src/events/function_bitmap_event.h
• src/events/function_bitmap_event.c
• src/events/function_key_event.h
• src/events/function_key_event.c

Design notes:

• function_bitmap_event carries the 29-byte function bitmap from host
• function_key_event carries usage + action when a configured function key is pressed or released
• these events isolate transport modules from keyboard internals

Planned next nodes

Node 2: keyboard split point

Files updated in this step:

• src/modules/keyboard_module.c

Design notes:

• reuse the existing keymap and HID path
• add one explicit split point before HID submission
• keep normal keys on HID
• send configured function keys to private transport only

Implemented behavior:

• store the 29-byte function bitmap
• for keyboard usages marked as function keys:
  • stop normal HID reporting
  • emit function_key_event
• for consumer usages marked as function keys:
  • stop normal HID reporting
  • emit function_key_event

Node 3: nanopb build integration and protocol core

Files updated in this step:

• CMakeLists.txt
• prj.conf
• app.overlay
• inc/keyboard_proto.h
• src/modules/keyboard_proto.c

Design notes:

• use NCS built-in nanopb instead of a hand-written protobuf runtime
• generate protocol code from the shared .proto
• keep one firmware-side protocol helper that:
  • encodes and decodes CdcPacketBody
  • encodes and decodes CdcFrame
  • validates checksum
  • routes host commands back into existing modules

Implemented behavior:

• enable CDC ACM class in Zephyr USB device-next stack
• add a CDC ACM UART node in devicetree
• wire zephyr_nanopb_sources() into the build
• add protocol helper functions for:
  • body encode/decode
  • CDC frame encode
  • CDC frame stream extraction
  • hello response build
  • ack/error build
  • function key event build
  • LED state build
  • host command dispatch

Planned next nodes

• GATT transport module

Node 4: CDC transport module

Files added in this step:

• src/modules/usb_cdc_proto_module.c

Design notes:

• use the CDC ACM UART abstraction from Zephyr
• keep CDC transport separate from protocol details by delegating encode/decode to keyboard_proto
• report private outgoing events back to host over CDC

Implemented behavior:

• receive raw CDC bytes by UART IRQ
• accumulate bytes into a stream buffer
• extract protobuf CdcFrame
• decode host messages and dispatch them
• send:
  • HelloRsp
  • Ack
  • Error
  • FunctionKeyEvent
  • LedState